Polycell Stain Stop Aerosol

Task difficulty: Very easy

Polycell Stain Stop is a highly pigmented paint which permanently prevents existing stains reappearing through paint. It provides one coat coverage over water stains, grease, nicotine, crayons, rust and soot.

  • Permanently prevents existing stains reappearing through paint.
  • One coat coverage for water stains, grease, nicotine, crayons, rust and soot.
  • Also available in a paint for brush application.

How to use

  1. Ensure surface is clean, dry and free from loose material.
  2. When applying it is advisable to wear eye protection.
  3. When stopping stains caused by water or damp, make sure that the original cause of the problem has been rectified.
  4. Shake well until you hear the steel pellet rattling and then continue for 1 minute more.
  5. Spray evenly over stain from a distance of 20-30 cm (9"-12") until stain is fully covered.
  6. Allow at least 10 minutes to dry before painting or wallpapering.
  7. For especially stubborn stains, allow Polycell Stain Stop to dry fully, then apply a second coat.
  8. If over painting with gloss or eggshell paint, first prime treated areas with water based paint.
  9. After use, invert the can and spray until nozzle is cleared to prevent clogging.

Further information

Tools required
Masking tape and safety glasses.
Storage
Store safely.
Available in the following sizes
250ml and 500ml aerosols
Cautions
Pressurised container: Protect from sunlight and do not expose to temperatures exceeding 50 degrees.. Do not pierce or burn even after use. Do not breath spray / vapour. Use only in a well ventilated area.
Polycell Stain Stop Aerosol

Polycell Stain Stop Aerosol application method:

  • Surface dry in 15 minutes (depending on conditions)
  • For plaster, masonry and wood
  • Use indoors

Shopping List

There are no items in your shopping list.

View full shopping list