Polycell Squeeze & Seal Interior

Task difficulty: Quite easy

Seals gaps around door frames, window frames and skirting boards. Suitable for wood, plaster, brick, and anodised aluminium.

  • Good control - no gun required.
  • Over-paintable and available in white.
  • Suitable for wood, plaster, brick, and anodised aluminium.

How to use

  1. BEFORE USE; Ensure surfaces are clean and free from loose material or mould. Remove old sealant residue completely before applying the new sealant - use Polycell Sealant Remover if necessary.
  2. Work tube well between fingers.
  3. Carefully cut nozzle to the required bead width (max 6mm) using a sharp knife. Cut the tube seal and attach nozzle.
  4. HOW TO USE; Squeeze tube between fingers and palm of hand, and apply sealant directly into the gap as a continuous, single bead.
  5. Smooth lightly with a wet round ended tool, angling the bead to shed water.
  6. Remove excess sealant with a damp cloth before it dries.
  7. After use, fit cap to the end of the nozzle to prevent product drying out.
  8. Wash tools with warm water.

Further information

Tools required
Round ended tool, damp cloth.
Storage
Store product away from frost.
Available in the following sizes
300ml tube
Cautions
For interior use only.
Polycell Squeeze & Seal Interior

Polycell Squeeze & Seal Interior application method:

  • Dry in at least 24 hours (depending on conditions)
  • Use indoors
  • For gaps around door frames, window frames and skirting boards

Shopping List

There are no items in your shopping list.

View full shopping list